|
 |
|
Questions???
Call 253-853-7462 |
|
|
|
|
|
|
|
This page
is part of our previous web site,
to visit our new web site and extensive on line
catalogue,
click here!
|
 |
Edhard offers several models of Power
Bases that match up with their
Filler Units
and
Spouts
to meet the different and unique
needs of their customers!
Below are the four
series of power base units available and the different models available within
each series. To purchase now, just click on the model number or picture
to go to the purchase page!
|
|
NORMAL CYCLE:
The amount of product to be dispensed can be preset at the digital keypad.
As the trip arm is pressed, the unit will cycle once to dispense the
preset amount, then stop and reverse.
REVERSE:
The reverse is needed to pull product back after a dispensing cycle is
completed, which prevents dripping. Reverse can be adjusted to meet
specific requirements.
CONTINUOUS DISPENSING:
When selecting this function, the operator or a remote-triggering device,
such as a photoelectric switch, determines the start and stop of the
pumping action. This function is useful when a continuous stream of
product is deposited on a conveyor or manually via a hose attachment. |
P-Series
The P-Series
power base is available with 1/25HP or 1/15HP. Both type bases are
reliable and durable, engineered for years of maintenance-free
service. The exterior is designed so that merely a damp cloth is
needed to keep it clean. both bases have the same features that make
them useful in a wide variety of applications. They include - Normal
Cycling, Reverse, Automatic Cycling and continuous Dispensing, which can
be selected at the keypad. The F-Series filler units are suited for
P-Series power bases.
  
<Back
To Top> |
|
| Model
Number |
Description |
Electrical/Power |
Price |
Purchase |
| P-4010 |
Power Base |
120V 60Hz
1/25 HP |
|
|
| P-4012 |
Power Base |
120V 60Hz 1/15 HP |
|
|
| P-4020 |
Power Base |
220/240V 50Hz 1/17HP |
|
|
|
|
|
PS-Series
The PS-Series
power base offers the same reliability and maintenance-free design as the
P-Series with the same controls and operating functions. The added
benefit of the PS-Series power base is its 1/8HP motor. The availability
of higher power broadens the range of products that it can dispense.
It is best suited for use with FS-Series and RP-Series filler units.
<Back
To Top> |
| Model
Number |
Description |
Electrical/Power |
Price |
Purchase |
|
PS-4028 |
Power Base |
120V 60Hz 1/8HP |
|
|
|
PS-4030 |
Power Base |
220/240V 50Hz 1/8HP |
|
|
|
|
 |
PV-Series
The PV-Series
power base give s the operator complete control over the speed at which a
product is dispensed, the amount to be dispensed, the ability to adjust
reversing of the pump after each cycle, automatic cycling and continuous
dispensing. The ability to control all of these functions broadens
the range of product applications.
SPEED CONTROL:
This is essential in order to deliver a product onto a conveyor by
precisely matching the speed of the belt. It also enables a product
to be dispensed through a spout or a hand-held hose assembly at a speed comfortable
to the operator.
<Back
To Top>
|
| Model
Number |
Description |
Electrical/Power |
Price |
Purchase |
|
PV-4000 |
Power Base,
variable speed |
120V 50/60Hz
1/4HP |
|
|
|
PV-4001 |
Power Base, variable speed |
220/240V 50/60Hz 1/4HP |
|
|
|
|
|
The PT-Series is a completely
portable system consisting of the power base and pump assembly. When
pumping from a large vat, the power base and pump assembly may be placed
on a table or our specially designed cart. The suction tube, fitted
with a check valve on one end, extends directly down to the bottom of the
vat. The system may be placed alongside a conveyor with a discharge
spout configuration extending over the moving conveyor. The spout
configuration may be directed in a 180-degree radius.
The power base has the
same functions as our PV-Series, namely-speed control, reversing, normal
cycling, automatic cycling and continuous dispensing.
There are two basic pumps
available for the PT-Series. The FT-Series is a gear type pump and is for
metering smooth products. The FTR-Series is a lobe type pump
designed to meter grainy material as well as products containing particles
(nuts, fruit etc.) |
PT,
FT and FTR Series
The PT-Series transfer system meters products directly
from a mixing bowl or other container, thus eliminating frequent and time
consuming hopper refills.
The PT-Series power base
can be used in two distinct modes:
- As a metering transfer
system, where the product can be pumped directly from a large vat or
bowl and dispensed in metered quantities through a variety of
accessories and custom spout configurations.
- As a gravity fed
system, where the product is placed in a hopper and dispensed through
a selection of accessories and custom spout configurations.
<Back
To Top>
|
|
Power
Bases
| Model
Number |
Description |
Electrical/Power |
Price |
Purchase |
| PT-4035 |
Power Base
Transfer |
120V
50/60Hz 1/3HP |
|
|
| PT-4036 |
Power Base
Transfer |
240V
50/60Hz 1/3HP |
|
|
Pump
Assembly
| Model
Number |
Description |
Electrical/Power |
Price |
Purchase |
| FT-3342 |
Pump Assembly |
Stainless
Steel, single outlet, vertical gear type |
|
|
| FTR-3343 |
Pump Assembly |
Stainless
Steel, Single outlet, vertical lobe type |
|
|
PT-Series
Cart
| Model
Number |
Description |
Construction |
Price |
Purchase |
| PT-8010 |
Cart for PT-Series Power Base |
Stainless Steel |
|
|
<Back
To Top> |
|
|
|
|
|
Bakery
Equipment.com, Inc.
PH: 253-853-7462 M-F 8am-4pm PST
FX: 253-853-7487
|
|
All
Contents Copyright © 2000 - 2002 BAKERY
EQUIPMENT.COM INC. All rights reserved. Reproduction
in whole or in part in any form or medium without
express written permission of BAKERY EQUIPMENT.COM
INC. is prohibited. Web Design by: Platinum
Impressions
|
|
|
|
 |
|